Spark R&D Dynafit Adapter Plateby Spark R&D

Product Info

Spark R&D Dynafit Adapters allow drill free use of Dynafit toe pieces for the part time or full time hardboot split board rider. Bindingless touring reduces weight for less fatigue and more pow turns. Toe pieces are also available from Spark R&D.
Included in this kit
- 2 pair of Dynafit Adapter plates
- 15 M6-10mm screws
- 9 M5-10mm screws
- 9 Internal Tooth Lock Washers

Tools Needed
- #3 Phillips Screwdriver
- #2 Phillips Screwdriver


Tech Specs/ Instructions:

• 1. Remove the Voile touring bracket and heel risers. Using a #3 phillips head screwdriver, install the Spark R&D Dynafit Adapter Plates using three M6-10mm Phillips head screws.
• Place the Dynafit Speed Radical Toe Piece on top of the adapter plate. Using a #2 phillips head screwdiver, attach the toe piece using four M5-10mm screws and four lock washers. WARNING: Lock washers must be used to avoid screws hitting your board.
• Click your boot into the toe piece to determine proper placement of the heel riser. The riser should contact the heel of your boot, not the arch.
• Using a #3 phillips head screwdriver, attach the heel adapter to the board using two M6-10mm screws.
• Using a #3 phillips head screwdriver, attach the heel riser to the board using two M6-10mm screws.
• 
  

NOTE: Additional information and answers will be available on our website: www.sparkrandd.com or feel free to call us any time at 406.580.7674.

TEAM BERG'S Serving snow sports enthusiasts since 1955