The Spark R&D Arc PRO Splitboard Bindings: Spark's lighter weight, pow-chasing, touring machine, starring the Tesla T1 System. (This is the T1 version of the discontinued Magneto binding.) Maximum cutouts in baseplate shave weight, yet maintain strength and performance, and allow puck adjustment with bindings in place. Features a softer version of the Rip N' Flip Highback for easy flex and mobility, as well as more low profile ankle and toe straps. Long tours, epic over-nighters, trees, steeps – these bindings can do it all. Incredibly lightweight! (10% lighter than the Magneto). Includes Tesla touring brackets, Tesla T1 heel rests, and Spark Pocket Tool.
One Climbing Wire: T1 stands for OneWire: low (12°), to high (18°) climbing positions and back again while touring
Precise Sizing: The single wire baseplate redesign opened up the possibility for a narrower heel and shorter baseplate construction for our size small bindings.
T1 Heel Rest: Redesigned heel rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the NEW T1 Heel Locker in place.
Snap Ramps & Side-Lock Touring Brackets: Just like the good ole days of our original Tesla System, T1 bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp. No pins, no cables
Puck Compatibility: Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Check out the NEW Spare Pucks
Ibex Crampons: Slide in from the side while touring and two sets of horns on the Ibex Crampons catch the wire in both the 12° and 18° climbing positions, pushing the teeth fully in to the snow for max security on any pitch.
T1 Heel Locker: New design snaps in to better stay put in locked or free mode. Larger radius bends are stronger and the design allows for more variation in insert locations on the board.
Requires Spark or Voile Puck System– Slide the bindings on and snap the ramp down to install. Flip the ramp up and slide the bindings off to remove. The most functional and intuitive way to attach your bindings to your board in ride mode. Compatible with Ibex Crampons – Install or remove on the fly without the need to unstrap. Climbing wire pushes crampon teeth fully into the snow in both the 12 and 18 degree positions for max security on any pitch.
Berg's is the BestAwesome service! Nice folks. Highly recommend.- KevinGreat experienceBerg's was quick to answer my question online and so helpful with my order. I got a great deal and I'm thrilled with my skis!- AlyssaThanks so much!!!Thank You! As for me - You are great independent family owned store! I'm sure, I will shop here again! Big thanks guys!- Tomasz