Scarpa T4 Ski Boots - Men'sby Scarpa

Product Info

You can't keep a good boot down, the Scarpa T4 is back (formally T-3) and better. One of those perfect lightweight tele boots now with the t-2 Torsion Beam lower chassis for more torsional power, but without sacrificing tour ability into the lone backcountry. A perfect 2 buckle boot for low-angle touring or the mid-sized skis that run more classic in width. It is a warm welcomed return to lightweight tele with a truly versatile boot. The T4 is the go-to choice for old-schoolers and entry-level telemarkers. 

SCARPA BOOT SIZING
SCARPA ski boots break on the half size, this means that a half size shares the same shell length as the whole size above it but the liners are lasted for each 1/2 size. For example, a 25.5 and 26.0 are the same shell size but the respective liners come pre-molded to the half size.

**Online Boot Purchase Disclaimer
Buying the right boots online isn’t easy. At Bergs we always recommend that you get sized properly by a boot fitter to get the best results. Finding the proper fit is vital to performance and comfort and all models have a different fit and shape. If you would like some general tips on how a boot should fit, please scroll down to the bottom of the page.

FEATURES
• Binding Compatibility: 75mm / 3-Pin
• Last: 102 mm
• Flex: 80
• Forward lean: 16º
• Range of Motion: 16º
• Ski/Walk Mode: T4 Tour
• Closure: 2 buckles
• Outsole: Vibram® Print
• Shell/Cuff/Tongue: Pebax®
• Intuition® Cross Fit BC liner for durability and comfort
• Torsion beam for lateral control
• Ergonomic bellows for a great fit
• Two easy-lock buckles with micro adjust
• Ski/Walk mechanism for downhill control and touring comfort
• Weight: 1340g; 2lbs 15oz (1/2 pair size 27)
• Made in Italy
• 1 Year Limited Warranty

TECHNICAL SPECS
Intuition® — Leader in boot liner technology, uses closed cell EVA foam for performance ski boots

Pebax® — Utilizes a unique combination of high performance properties; sustained flexibility at low temps, high cold impact resistance and outstanding energy return

Vibram® — World leader in high performance rubber soles and compounds

FITTING YOUR BOOTS
– To properly assess the fit of any boot you must lace or buckle it completely. The boot will feel small until you do this because your toes will be pushed to the front until laced or buckled. Also, keep in mind all boot liners stretch out and get bigger. 
– First, lace or buckle the boot loosely. Next, flex into the boot to drive your heel into the heel pocket. Doing this makes room for your toes. Lastly, finish lacing or buckling the boot in a flexed position.
– Be sure to wear the boots for at least 10 minutes fully laced or buckled before making a determination. Remember these boots are not made for walking, keep your knees slightly bent and flexed forward into riding position. When doing this your heels should be pushed into the back of the boot and your toes should be comfortable. 
– You should wear the thinnest sock you are comfortable with. Blood flow is the number one thing that keeps your feet warm. Adding more material around your feet with thicker socks increases the chances of reducing blood flow.
– To help your foot sit properly in your boot, you may consider an aftermarket footbed like Superfeet® or Sidas®. A footbed with arch support, not just cushion, helps align your foot in the shell and alleviates pressure points. Footbeds should be sized to your arch height and length, not your shoe size. 
– Spend some time choosing your boots, they are the most important piece of your gear!

TEAM BERG'S Serving snow sports enthusiasts since 1955